planning permit · Ballarat, VIC
WINTER VALLEY
Watch this street
What’s proposed
11 Harness Way
- Status
- WithdrawnThe applicant withdrew it, or it lapsed or was cancelled.
Council’s wording:
The levels of the house have changed a bit because of the shared neighbouring lot, the level of the garage is changed to avoid undermining the neighbouring slab. The windows are the same, but the sizes have changed a bit because of the supplier's specifications Below are the comments from the architect: There is a difference in house FFLs between the town planning drawings and working drawings because a different TBM has been used on each survey, however, the levels are the same relative to the site. There has been a change to the Garage FFLs as the step-down was reduced from 190mm to 86mm. This was to avoid undermining the adjoining footing and will not increase wall height, as the top of the wall height has not changed. The changes were made as a reason because the client's previous builder went into administration and didn't have the plans so the plans were made by another architect.
- Lodged
- (3 years ago)
- Council reference
- PLP/2022/54/SC
- Council
- Ballarat, VictoriaEverything we track from Ballarat council
- Last collected
- from the council’s register
Submissions
Have your say
The council’s record shows this planning permit application as withdrawn, so it has probably moved past the point where comments are taken. If you have questions about it, contact Ballarat council directly and quote PLP/2022/54/SC.
Comments on this page are notes for neighbours. They aren’t sent to the council and don’t count as a submission. Get the next one near here by email so you hear about it while there’s still time to respond.
Neighbours
Comments (0)
No published comments yet.